NEXO BOND IT

 ‘Bonding Agent” - a unique product that serves as an excellent bond on the RCC background and the internal gypsum based or any other plaster based wall lining. Its unique formula of Polymer, selected sand fillers, additives & polymers makes it coarse and improves its bonding properties.You need not physically develop the surface by hacking or any other methods. Bonding Agent is specially formulated as a plaster bonding agent for pre – treatment of smooth backgrounds. It contains an aggregate to provide a mechanical key.

Features • Excellent cohesive bond to RCC, Concrete and other surfaces. • Better adhesion /bonding due to lime/sand powder • Application in one coat • Green in color for easy identification • Contains fine aggregates for better mechanical, as well as chemical adhesion

Background Preparation Surface on which NEXO BOND IT application to be done should be clean, dry and free from mold oil or any other agents. Any faults in the structure, particularly those which may lead to moisture penetration, must be rectified. Just before application of NEXO BOND IT, prewetting must be done with the help of a brush/roller. Mixing Mix material properly with clean rod to properly distribute solid particles in the solution. Application Use good quality paint brush. The brush should be cleaned with enough water immediately after use. Apply with even distribution of fine aggregates over the surface. Allow it to dry thoroughly for around 24 hours.